 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NMA 2500 SERIES DUAL BIAS NOISE MODULES 10 MHZ TO 8.5 GHZ 5V and 12V Bias DESCRIPTION REV 6.2008 NMA 2500 MODULES MODEL NMA2510 NMA2511 NMA2512 NMA2513 NMA2514 NMA2515 NMA2516 NMA2517 FREQUENCY 10MHz - 1.0GHz 10MHz - 1.5GHz 10MHz - 2.0GHz 10MHz - 4.0GHz 100MHz - 6.0GHz 30MHz - 3.0GHz 7.8GHz - 8.5GHz 2.0GHz - 8.0GHz The NMA 2500 Dual Bias Noise Module is a compact high power noise source ideal for appliations in jamming, dithering, built-in test and calibration. The dual bias voltage allows for greater flexibitlity in system integration and lower power consumption. The NMA 2500 is packaged in a sealed housing for ease of integration into a wide range of military and commerical applications. RF SPECIFICATIONS BY MODEL NUMBER NOISE OUTPUT LEVEL FLATNESS * (window) dBm/BAND (min) dBm/Hz (min) ENR(dB) (min) SPECIFICATIONS 84.0 82.2 81.0 78.0** 74.0 78.0 74.0 74.0 Operating Temperature: -30 to +85oC Storage Temperature: -65 to +95oC Supply Voltage: Dual Bias +5.0 V Bias - Voltage Range: +/- 3% - Current Draw @ 300 mA max +12 V Bias - Voltage Range: +11.8 to 18.0 V - Current Draw @ 25 mA max Output Impedance: 50 ohm Peak Factor: 5:1 specifications subject to change based on technological advances 2.0dB 2.0dB 3.0dB 4.0dB 4.0dB 3.0dB 2.0dB 4.0dB 0 0 0 0 -3 -1 -11 -2 -90.0 -91.8 -93.0 -96.0 -100.0 -96.0 -100.0 -100.0 * Flatness is defined as the decibel ratio of the highest amplitude peak minus the lowest across the frequency band. **90 mA max. PERFORMANCE TEST DATA Each unit ships standard with a spectrum analyzer plot of the noise output. Upon special request, Micronetics can supply tabular data in text file format on CDROM or floppy disk. The data points consist of power spectral density at discrete frequency points across the frequency band. APPLICATIONS Frequency response built-in-test (BIT) for communication receivers Antenna/RF front end testing 70/140 MHz & L-Band modem BER testing Noise and interference simulation Jamming / jamming simulation Power distribution calibration of multiple receiver systems USEFUL NOISE CONVERSIONS 0 dB ENR = -174 dBm/Hz Power (dBm) = N0 +10log (BW) where: N0 = Noise spectral density in dBm/Hz BW = Bandwidth in Hz (equ 1) (equ 2) HOW TO ORDER NMA-25XX-XX Option 1 = Stnd 2 = TTL* INSTALLATION NOTES (1) Should be mounted to a thermally conductive baseplate (2) Select style code T for mechanical clearance of mating SMA (m) connector nut with respect to thermally conductive baseplate (3) Warning: when using a narrow band filter following the noise module, use a 3 dB or reater pad to prevent damage caused by refective power. Package S=Pkg Style S * T=Pkg Style T * "1" noise on (internal pull-up) "0" noise off MICRONETICS / 26 HAMPSHIRE DRIVE / HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 WEB: WWW.MICRONETICS.COM |
Price & Availability of NMA2510
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |